Главная » 2026»Февраль»5 » WinPE 11-10-8 Sergei Strelec 2026.02.05 English version
17:05
WinPE 11-10-8 Sergei Strelec 2026.02.05 English version
WinPE 11-10-8 Sergei Strelec - загрузочный диск на базе Windows 11-10-8 PE — для обслуживания компьютеров, работы с жесткими дисками и разделами, резервного копирования и восстановления дисков и разделов, диагностики компьютера, восстановления данных, антивирусной профилактики и установки ОС Windows. Удачной работы!
Состав сборки: WinPE11×64 WinPE10×64 WinPE10×86 WinPE8×86 WinPE8×86(Native)
Resetting passwords Windows Login Unlocker 2.3.0.6404 Reset Windows Password 9.3.0.93 PCunlocker 6.1 Simplix Password Reset 5.1
Other programs UltraISO 9.7.5.3716 PowerISO 9.0 gBurner 5.5 Total Commander 9.00 FastStone Capture 7.7 IrfanView 4.38 STDU Viewer Microsoft Office 2007 Bootice 1.3.4 Unlocker 1.9.2 7-ZIP WinNTSetup 5.4.2 78Setup 2.4 (author conty9) Double Driver 4.1.0 Imagex GImageX 2.1.1 USB Safely Remove 7.0.5.1320 Media Player Classic EasyBCD 2.4.0.237 EasyUEFI 6.2.0 Far Manager 3.0 Build 6161 Dism++ 10.1.1002.1 WinHex 20.8 SR1 CIHexViewer 2.0 TeraCopy 3.6.0.4 FastCopy 3.85 Everything 1.4.1.1026 WinDirStat 2.5.0 TreeSize 9.0.1.1830 HardLink ShellExtension 3.9.2.4 NirLauncher 1.30.21 Remote Registry Editor Registry Editor PE Runtime Captain Nemo 7.00 Acronis Shell Extension OemKey ShowKeyPlus 1.1.18.0 CMOS De-Animator 3 DiskCryptor 1.4.0 beta VeraCrypt 1.26.24 OneLoupe 6.16 Paragon HFS+ for Windows 11.4.298 Paragon Linux File Systems for Windows 5.2.1183 Windows Recovery Environment (WinPE 10, 11)
Data Recovery R-Studio 9.5.191686 Active File Recovery 26.0.3 Active Partition Recovery 26.0.2 Runtime GetDataBack 5.76 Runtime GetDataBack for NTFS 4.33 Runtime GetDataBack for FAT 4.33 Runtime Raid Reconstructor 5.16 EaseUS Data Recovery Wizard 20.1.0 Build 20260107 TestDisk 7.3 Recover Keys 12.0.6.311 ShadowCopyView 1.16 Restore WLAN passwords
HDD Regenerator 2011 HDDaRTs 20.03.2025 (author program Ander_73) BIBM++ 1.92 (author program Ander_73) MemTest86 11.6.1000 (UEFI) HDD Regenerator 2011 MHDD 4.6 Victoria 3.52 Memtest86+ 7.20 (UEFI/DOS) HDAT2 7.6 GoIdMemory PRO 7.85 Active Password Changer Professional 5.0 Ghost 11.5 BootIt Bare Metal 1.92 DiskGenius 5.2.0.878 Kon-Boot for Windows 2.5.0 Hard Disk Sentinel for DOS 1.21 DRevitalize 3.32 CHZ Monitor Test 2.0
SmartFix Tool Official website https://smartfix.pro/en/ To update the program, download from the official site and replace in the folder SSTR/MInst/Portable/Antivirus You can also upgrade from WinPE if you have an Internet connection.
Kaspersky Rescue Disk 2018 — Download from the official site and unzip the ISO image to a folder Linux/krd2018 оn the USB Drive. Kaspersky Rescue Disk 2018 http://rescuedisk.kaspersky-labs.com/updatable/2018/krd.iso
Dr.Web LiveDisk — Download ISO image from the official site and unpack to a folder on a USB flash drive Linux/DrWeb. Dr.Web LiveDisk http://download.geo.drweb.com/pub/drweb/livedisk/drweb-livedisk-900-cd.iso
In the folder SSTR/MInst/Portable/Antivirus instead Dr.Web CureIt! and Kaspersky Virus Removal Tool pacifiers. Need to download the latest version and replace the pacifiers.
Actual version is always available for download here: Dr.Web CureIt! http://download.geo.drweb.com/pub/drweb/cureit/cureit.exe Kaspersky Virus Removal Tool http://devbuilds.kaspersky-labs.com/devbuilds/KVRT/latest/full/KVRT.exe
This will work in both BIOS and UEFI mode In BIOS mode in the boot menu, you need to go to the Grub4Dos menu (down arrow) In EFI mode, the default Microsoft standard EFI boot loader is used. You must manually switch the bootloader to GRUB2 To expand functionality when booting in UEFI mode, you can switch to the GRUB2 bootloader. However, booting with Secure Boot enabled on all computers is not guaranteed.
Switch between EFI loaders Microsoft or GRUB2, you need to run the batch file on a flash drive in the EFI/boot folder _MICROSOFT_EFI.bat - switches to the Microsoft bootloader _GRUB2_EFI.bat - switches to GRUB2 bootloader
You can always see which boot loader is active by file in the EFI/boot folder [MICROSOFT_MODE] - Microsoft loaders are active [GRUB2_MODE] - GRUB2 boot loaders are active
When using the GRUB2 boot loader in EFI, you can add Acronis True Image 2018/2019/2020, Acronis Disk Director 12, Kaspersky Rescue Disk 2018, Сlonezilla, and TeraByte Image for Linux, Parted Magic, Ubuntu Desktop amd64. (download both in UEFI and BIOS)
Note: For Acronis True Image, it is not necessary to extract the entire ISO image. It is now large in size and will be take up a lot of space. For the x64 version, just extract the files from the ISO image to the folders below: dat10.dat, dat11.dat and dat12.dat For x86 version: dat2.dat, dat3.dat and dat4.dat
Acronis True Image 2024 Unpack the ISO image into a folder on the USB flash drive Linux/Acronis2024
Acronis True Image 2021 Unpack the ISO image into a folder on the USB flash drive Linux/Acronis2021
Acronis True Image 2020 Unpack the ISO image into a folder on the USB flash drive Linux/Acronis2020
Acronis True Image 2019 Unpack the ISO image into a folder on the USB flash drive Linux/Acronis2019
Acronis True Image 2018 Unpack the ISO image into a folder on the USB flash drive Linux/Acronis2018
Acronis Disk Director 12 Unpack the ISO image into a folder on the USB flash drive Linux/ADD12
Kaspersky Rescue Disk 2018 Download ISO image from the official site http://rescuedisk.kaspersky-labs.com/updatable/2018/krd.iso and unpack the image to the Linux/krd2018 folder on the USB flash drive.
Parted Magic 2020 ISO image rename in pmagic.iso and copy the folder Linux/pmagic
Ubuntu Desktop amd64 Unpack the ISO image into a folder on the USB flash drive Linux/ubuntu
Clonezilla Download ISO image from official site, rename it to clonezilla.iso and copy ISO image to folder Linux/clonezilla32 or Linux/clonezilla64 according to the size of the image.
TeraByte Image for Linux Unpack the ISO image, respectively, the bit depth in the folder on the USB flash drive Linux/TeraByteImageLinux32 or Linux/TeraByteImageLinux64
To import WLAN profiles on your computer or client computer, export the WLAN profile (s) (you can immediately go to the SSTR\WLANProfile folder) program Marat Galiullina Smart WiFi Solution (available in the archive) Or by means of Windows (Command line launch — PCM — On behalf of the administrator.)
WLAN profiles put in a folder on your USB flash drive SSTR\WLANProfile The number of profiles does not matter. After loading WinPE, WLAN drivers will be installed and WLAN profiles imported. You will only need to select the necessary network in the PENetwork program, and click — Connect You can also import manually after downloading, from the shortcut on the Desktop, or the Start menu, after installing the Wlan driver.
When connecting a network disk through the Windows Explorer interface, i.e. through the standard window when calling the command - Connect network disk, in the User name field, it is necessary to write data in the following format
computer name/username, not just username. or IP address/username, not just username
Example: STRELEC-PC\SEREGA or 192.168.0.100\SEREGA
This is due to the peculiarities and limitations of Windows Explorer working from a system account
The recommended method, from the command line (.som, .bat file), using the net.exe utility In this option, the connection is much faster. The command parameters in this variant are standard.
Example: net use Z: \\STRELEC-PC\share /USER:serega strelec or net use Z: \\192.168.0.100\share /USER:serega strelec
where 192.168.0.100\share - address. serega - username strelec - password
When connecting from the Administrator account, the settings in both options are standard.
In EFI mode, the default Microsoft standard EFI boot loader is used.
To expand functionality when booting in UEFI mode, you can switch to the GRUB2 bootloader. However, booting with Secure Boot enabled on all computers is not guaranteed. So it's better to turn it off When booting from GRUB2, there are memory checking utilities and you can also add various Linux images.
Switch between EFI loaders Microsoft or GRUB2, you need to run the batch file on a flash drive in the EFI/boot folder _MICROSOFT_EFI.bat - switches to the Microsoft bootloader _GRUB2_EFI.bat - switches to GRUB2 bootloader
You can always see which boot loader is active by file in the EFI/boot folder [MICROSOFT_MODE] - Microsoft loaders are active [GRUB2_MODE] - GRUB2 boot loaders are active
[spoiler=I do not have a flash drive, how do I quickly boot from my computer hard drive:] No problem! To boot quickly from your computer hard drive:
Download WinPE ISO Image Extract the SSTR folder from the ISO image to the root of any disk / partition, it is better, of course, not the system one. Run the file in the SSTR folder
Boot_x64_WinPE.cmd — for loading WinPE x64 (run as Administrator) or Boot_x86_WinPE.cmd — for loading WinPE x86 (run as Administrator)
The computer will automatically reboot to WinPE. After rebooting from WinPE, the computer will boot normally
After normal PC boot, remove WinPE boot entry from BCD by running the file BCD_recovery.cmd (run as Administrator) or manually uninstall with BOOTICE
Possible applications: For example, remote support. The client only needs to download the image, extract the SSTR folder and start the batch file. And you already have to remotely connect to the PC.
For beginners: if you are reinstalling Windows, you do not need to do anything with the BCD. It’s already new there. [/spoiler]
This method is designed to install controller drivers if WinPE does not have the necessary WLAN drivers, network drivers, etc. Note: This method is not intended for installing volumetric drivers, video, etc. Drivers must be unpacked, i.e. * .sys driver, * .cat security directory, and * .inf file In order for your drivers to install when WinPE10 boots up, place them on your bootable USB flash drive in the SSTR/USER/MY_DRIVERS_x64 or SSTR/USER/MY_DRIVERS_x86 folders. They will be installed automatically. Subfolders are allowed. In order for your drivers to install when WinPE8 boots up, place them on your bootable USB flash drive in the SSTR/USER/MY_DRIVERS_x86_WinPE8 folder Subfolders are not allowed.
If you want to change the image of the desktop, you must put your picture in the SSTR\MInst\Wallpaper folder to replace the existing Wallpaper.jpg under the same name (that is, replace its)
1.Program 78Setup. Full description of the program on author page conty9 For this folder SSTR/_WIN, in the appropriate subfolder you need to put install.wim or install.esd. After starting the program you will see a list of available Windows versions to install, and click Start Also in the root folder _WIN possible to put ISO images of Windows The choice will be available in the box below _WIN Folder can be placed anywhere, even in the other root of the drive or partition. 2. Program WinNTSetup (author program JFX)
This is a special mode in which the first load specially prepared minimal kernel (without GUI) and works off a script that searches for media (DVD, USB-HDD) with an assembly and installs the "full" kernel.
+ Pros:
1. Fast loading on USB 1.x. Instead of conventional 5-10 min USB 1.2 - about 1 minute. 2. Less memory consumption (for Strelec assembly - less on ~ 250Mb). 3. Reduced CPU requirements (Native Mode kernel patched to work with the CPU starting from P4 / Athlon), scanning is disabled NX-Bit.
-Minuses:
1. Binding to the carrier (if extraction - PC "hangs"). 2. Slower core work (because everything is loaded not from the fast RAM-disk, and c is a slow media). In practice, special "brake" is not felt. 3. For compatibility with older CPU is disabled and multi-core support PAE.
Note: On modern PC is better to use normal startup.
On it is searched and launched (if found) windows\system32\boot\winload.exe. The option is not a panacea for the treatment… but it will help to load the Windows if the MBR/PBR entries are damaged, the bootmgr bootloader on the HDD, its BCD menu, other files from the boot partition, or the problem with the partition itself. After the OS is booted (it can boot up unactivated — this is normal, depends on the activation method), it will only be necessary to restore the boot files (if they were, of course, damaged) by regular or third-party utilities. Without special need, this method is not recommended.
All the recommended recording methods are in the archive in the folder — Burn to the USB flash drive The ISO image is also perfectly bootable from a bootable flash drive created by Ventoy Official website If you are writing other programs, such as WinSetupFromUSB, then please do not write that there are no programs or that it does not work. Learn the method of recording a particular program, I do not want to do it, because there are a lot of them.
If you have a flash drive with my disk, it is enough to remove the old image and unpack there new.
There are NO viruses in the assembly. There are SFX archives, which contain programs, compiled batch files, specific programs for PC maintenance, etc., to which different antiviruses react in different ways. If your antivirus detects a virus, and you trust it, or panic, the advice is standard, DO NOT USE MY ASSEMBLY. Make a conscious choice. The assembly is made mainly for people involved in PC maintenance, that is, for those who are in the subject. These people understand all the specifics of PC maintenance programs, the specifics of the WinPE assembly and its structure, and, accordingly, the reaction of antiviruses.
System requirements: 1. RAM 2 GB / Native 512 MB 2. PC with the ability to boot from CD/DVD-drive or USB.
Added: Small additional Storage driver packages have been added to WinPE x64. If necessary, you can install them from the Start menu OneLoupe 6.16 — Screen magnifier (x64)
